DPP2U Series 2u dc distribution panels provide distribution and overload protection for 1 to 20 circuits with circuit breakers that can be field installed/exchanged using a supplied puller tool.

UNIPOWER’s DPP2U Series circuit breaker panels provide distribution and overload protection for 1 to 20 circuits with circuit breakers that can be field installed/exchanged using a supplied puller tool. The panels are only two mounting positions (3.5 inches) high.

The dual-bus model provides up to 20 breakers 900A (10A/10B) distribution and alarm capabilities. The A and B sections are fully isolated from each other and are polarity neutral. Breaker capacities range from 2.5 to 200 amperes. A single-bus 450A model is also available.

Breaker and power fail alarms are indicated by a dual color LED (green/red) and Form C relay contacts for each bus.

Rear accessed load cables connect via 2-hole anti-rotation posts. All connections are straight on for easy installation.

DPAC1U Series AC circuit breaker panels provide AC distribution and overload protection for two to eight circuits.

The maximum output current capacity from each A or B section is 50A, or a total of 100A from both. Individual circuit breaker capacities may be chosen f rom 5A to 30A. Any combination of breakers may be selected as long as the total current capacity of 50A for each section is not exceeded. In the standard dual model (with sections A and B) the two sections are connected in common (parallel). An optional model is available with the A and B sections isolated.

The panels are only one rack space (1.75 inches) high and come with brackets that permit mounting in either a 19- or 23-inch relay rack. They can be mounted from the front of the rack with offsets every quarter inch front to back to align with existing rack mounted equipment.

DPB1U Series 1U DC breaker panel provide distribution and overload protection for 1 to 12 circuits. The panels are only one mounting position (1.75 inches) high.

The panel provides 1 to 12 single-bus breakers or 2 to 12 dual-bus (A&B) breakers (1 to 6 per bus) and distributes up to a total of 300 amperes of load current from two separate 150-ampere sources with true A and B distribution and alarm capabilities.

A and B sections of the dual-bus 1u dc breaker panel are isolated and can be separately configured for 12, 24 or 48 volts and are polarity neutral.

Breaker capacities are from 1 to 50 amperes. Alarms are indicated by a dual-color LED (green/red) and one Form C relay contact per bus.

The 1u dc breaker panels come with brackets that permit mounting in either a 19- or 23-inch relay rack. They can be mounted from the front of the rack with offsets every quarter-inch front to back to align with existing rack-mounted equipment.

DPP1U Series 1u dc distribution panels employ circuit breakers to provide distribution and overload protection for 1 to 16 circuits with circuit breakers that can be field installed/exchanged without the need for any additional tools.

The 1u dc distribution panels are only 1.75 inches high and provide up to 16 breakers single-bus 150A or dual-bus 300A (8A/8B) distribution and alarm capabilities.

The panels provide up to 16 breakers single bus 150A or dual-bus 300A (8A/8B) distribution and alarm capabilities. The A and B sections of the dual-bus panel are fully isolated. Breaker capacities range from 1 to 30 amperes.

Breaker alarm is indicated by a dual color LED (green/red) and Form C relay contacts for each bus.

The Sageon® Shield battery monitor is a stand-alone solution for monitoring the status of 48V battery strings. The Sageon® Shield, as a member of the Sageon® SageView® software ‘family’, has the familiar SageView® look and feel. It is also an excellent addition for non-Sageon® plants, adding battery monitoring capability with the same SageView® software interface.

The Sageon® Shield can be used to monitor individual cell voltages of a battery during a float or equalization operation, during a charge/discharge, and up to 4 battery current channels during charge/ discharge (with optional current transducers).

Each Sageon® Shield battery monitor is capable of monitoring the voltages of up to 24 cells or mono-blocks and can be expanded via the optional Sageon® Battery Monitor (SBM) to monitor 3 additional battery strings of 24 cells or mono-blocks each.

Using the TCP-IP/SNMP remote communications ability of the Sageon® Shield battery monitor and the SageView® software installed on your PC, cell voltages can be viewed in ‘real time’. From within SageView®, your cell voltage data can be viewed in various formats, providing you with a snapshot of the health of your power plant’s batteries.

The Sageon® Shield ships as standard with: in-line power protection devices, 1 x 10’ (~3m) ambient temperature sensor, 1 x 10’ (~3m) battery temperature sensor, and a 25’ (~7.6m) battery string (24 cell) wiring harness with 5/16” battery post adaptor terminals.

ARE Series analog single phase chargers have many inherent advantages… voltage regulation, short circuit protection, low operating costs (a combination of high efficiency and high power factor), easy maintenance and high reliability.

The ARE Series of analog single phase chargers combines these inherent advantages with advanced rectifier, control and filter circuitry, and user-oriented packaging. Designed specifically for utility and communication applications, the ARE Series analog single phase chargers are easily adjusted to meet your specific operating requirements and will provide years of low-maintenance service.

Controlled ferroresonant single phase chargers have many inherent advantages…voltage regulation, short circuit protection, low operating costs (a combination of high efficiency and low power factor), easy maintenance and high reliability.

The Micro ARE-M Series of ferroresonant single phase chargers combines these inherent advantages with advanced rectifier, control and filter circuitry, and user-friendly operator interface. Designed specifically for utility and communication applications, the Micro ARE-M Series ferroresonant single phase chargers are easily adjusted to meet your specific operating requirements and will provide years of low maintenance service.

Sageon III are 600 amp and 1200 amp Front Access DC power systems that combine a hot-swap modular rectifier unit with load distribution and multiple battery string connection.

The Sageon III 600 and 1200 amp front access DC power systems are the largest ‘Intelligent Power’ systems in the Sageon Family. They are simple to operate, with built-in intelligence to minimize manual adjustments and measurement settings, while providing information about system health and reliability.

The Sageon® III systems are capable of delivering either 600A (28kW) or 1200A (56kW) N+1 blocks of power for -48V applications and include up to 60 distribution breakers, all in a single 7ft bay.

The basic Sageon® components of smart rectifier, controller and flexible distribution enable this system to be easily sized.

The Sageon® family of power systems products will always accommodate your changing power needs and is designed to allow you to remotely view, record and act upon all the data from a site. The Sageon® III gives you the capability of battery and site monitoring demanded in today’s market.

The SAGEON II Power Module 600Amp Bulk DC Power System is available in two bulk power sizes 600A (N+1) and 400A (N+1), the Sageon II Power Module 600Amp Bulk DC Power System provides the flexibility to put power where it is needed.

The Sageon II Power Module 600Amp Bulk DC Power System consists of a power frame that includes the Sageon Controller and Rectifiers, mechanical mounting for up to nine rectifiers in the 400A offering and up to thirteen rectifiers in the 600A system. Each unit comes with an AC conduit box for ease of installation.

In addition to the basic control functions, the Sageon II Power Module 600Amp Bulk DC Power System supports all the advanced functionality available in all Sageon Family of products including: remote monitor and control, battery testing, individual cell monitoring, programmable battery recharge current, and site monitoring.

The SAGEON Micro 200 amp DC power system delivers the unmatched capability of a full size SAGEON Power System in a compact and cost effective solution.

Designed to deliver up to 200 amps of power for 24 volt or 48 volt systems, the Micro Power Module provides the flexibility to put power where it is needed. The Micro Power Module also offers the flexibility to configure the best solution for your needs with options including integrated battery disconnects and load distribution; all in space saving configurations from two through seven rack units.

The SAGEON Micro 200 amp DC power system consists of a power frame that includes the SAGEON Controller, mechanical mounting for up to seven SAGEON Micro Rectifiers, all inter-system cabling, and optional items including AC input breakers, battery disconnects, DC distribution breakers and fuses, and remote communications – all factory installed and tested. Installation cost and time are minimized because there is only one component to install. To complete your system simply connect your AC and DC cables, plug-in the SAGEON Micro Rectifiers, and you are ready to go.

In addition to the basic control functions, the SAGEON Micro 200 amp DC power system supports all of the advanced functionality available in a SAGEON Power System including; remote monitor and control, battery testing, individual cell monitoring, programmable battery recharge current, and site monitoring.