Sageon Tower RFK1

Sageon Tower RFK1

Guardian

Product Information

The Guardian Sageon Tower Retrofit Kits replace the legacy power section in existing Sageon power systems. The RFK1A is 8RU high and contains two rectifier/controller power shelves incorporating up to 7 Guardian family high efficiency hot-swap rectifier modules along with an ACX Advanced system controller plus an alarm module. A maximum total current of 375A N+1 is available.

The rectifiers are internally fan cooled with speed control which is a function of load and temperature, keeping acoustic noise to a minimum.

RFK1B and RFK1C are 8RU expansion kits that increase the overall capacity in increments of 500A to a total of 1375A N+1.

The ACX Advanced controller monitors system parameters, controls rectifier output, and provides alarms for system failures. The controller is hot-pluggable for easy field replacement in case of failure. There are 2 LED alarm indicators which indicate failures, (RED) Alarm and (YELLOW) Message. A third green LED indicates the controller is working properly. As standard ten form-C relay outputs provide the alarms for remote use. Two digital inputs and outputs are also provided as well as an SD card with sufficient capacity for more than 20 years data logging.

The system can be programmed by means of a remote PC web page display. Communication is by Ethernet LAN with SNMPv3 including alarm trapping. It also has provision for temperature compensated charging of an external battery using a supplied TC probe. An LCD Display/Touchpad is included for local metering, status, and setup.

The Guardian AGM Retrofit Kit is compatible with UNIPOWER’s free PowCom™ software which offers local and remote management through an advanced Windows GUI.

Three Year warranty
Features and Options
  • Replaces Power Section for
  • Legacy Sageon Tower Systems
  • >96% Efficiency Rectifiers
  • 375A to 1375A N+1 Capacity
  • Remote Monitoring & Control
  • Field Replaceable Controller
  • Ethernet Comm. with SNMPv3
  • 3 LED Alarm/Status Indicators
  • 10 Form-C Relay Alarms
  • LCD Display/Touchpad
  • Easy Installation
SPECIFICATIONS
OUTPUT
System Voltage -48VDC nominal | -53.5 float (factory default setting, user adjustable)
Maximum Capacity 600A
No. Rectifier Slots 11
DC CONNECTIONS
Bus Bars Lugs – ½” on 1¾” centers or ⅜” on 1” centers with oversized washers.
INPUT
Voltage (rectifier module) 1-phase 180-275VAC
AC Supply Configurations 1-phase 230/240VAC (L-N-PE)
2-phase 240VAC (L1-L2-PE)
3-phase (3-wire Wye) – 190/200/216/208/220/240VAC (L1-L2-PE / L2-L3-PE / L3-L1-PE)
3-phase (4-wire Delta) – 200/210/220/230/240VAC (L1-N-PE / L2-N-PE / L3-N-PE)
Frequency 47-63Hz
Maximum Input Current 18A per installed rectifier
Rectifier Power Factor >0.98 (typical)
MONITORING & CONTROL (ACX Advanced Controller)
Alarm Relays 10
Local Interface 4 x 20 LCD, 4-key menu, USB / RS232, microSD card slot for data logging
Remote Interface Ethernet / Modem using PowCom™ software package
Ethernet port allows monitoring and control over a TCP/IP network.
Web browser support + SNMPv3
LED Indications Green – System ON; Yellow – Message(s); Red LED – Alarm(s)
External Digital I/O 2 x Inputs, 2 x Outputs (TTL Level)
BATTERY MANAGEMENT
Symmetry Inputs 6 or 12 (can be redefined as analog inputs up to 100VDC)
Low Voltage Battery Disconnect (LVBD) Optional external: Programmable via system controller
Temperature Compensated Charging Optional: Programmable via system controller
COMPLIANCE
EMC EN 300 386 ; EN61000-6-3 (Emission) ; EN61000-6-2 (Immunity)
Safety CAN/CSA C22.2 No 62368-1:2014; UL 62368-1:2014; EN 62368-1:2014/A11:2017
ENVIRONMENTAL
Operating Temperature -40ºC to +55ºC
Storage Temperature -40ºC to +85ºC
DIMENSIONS, ins. (mm) 19.0 (483) W x 7RU H x 21.6 (553) D
INTELLIGENT BATTERY MANAGEMENT
(PROVIDED VIA ACX ADVANCED CONTROLLER)
Battery Disconnection System can provides voltage controlled disconnection of batteries using and external LVBD.
Boost Charging Manual time controlled or automatic boost charging with adjustable time and voltage levels.
Battery Tests Automatic or manual testing of batteries up to six times per year with a 10 test memory. Variables include test duration and end voltage.
Battery discontinuance test to ensure battery connection.
Enhanced Battery Monitoring Monthly logging of essential battery parameters including temperature, temperature hours, current, charging voltage and symmetry voltage, Data logged for 5 years.
Site Logs System tools developed to assist site management. Daily peak load and statistic logs available.
Symmetry Measurement Optional tool that measures batteries for early detection of thermal runaway.
Temperature Compensation Charging Allows continuous adjustment of output voltage according to battery temperature.
Features include adjustable compensation factor and separate thresholds for high temperature alarms.