Guardian Solar Converter

Guardian Solar Converter

Guardian

Product Information

The compact FPV30.48G 2.9kW 48VDC 60 amp Solar PV Converter joins the ranks of the Guardian products family supporting up to 14.5kW solar arrays in a 1RU 23” shelf. Maximum energy harvest from the valuable photovoltaic (PV) array is accomplished through a >99% Maximum Power Point Tracking (MPPT) algorithm.

The FPV30.48G 60 amp Solar PV Converter provides a modular building block for Renewable Energy and Hybrid sites and caters for a broad blend of CapEx, OpEx and ROI models. Accompanied by the Guardian Power System, indoor and outdoor enclosures and PV string combiners, Green Cubes provides a total site solution across a wide range of challenging environments.

Three Year warranty
Features and Options
  • True MPPT >99% energy harvest
  • Auto-detection of PV array size
  • 2.9kW output power
  • Rugged input voltage from 130-360VDC
  • 95% efficiency
  • International standards compliance
  • Thermal protection
  • Modular design, interoperable with AC-DC rectifiers in Guardian Systems
SPECIFICATIONS
INPUT
Voltage Nominal MPPT: 130 – 345VDC (Safety approved input voltage range)
Startup: 120VDC
Shutdown: > 400VDC
Derated Output Power: < 180VDC
Current 16Arms nominal, 17.6Arms max
Surge Immunity EN61000-4-5
OUTPUT
Voltage Range 44-57.6VDC
Power 2900W
Current 60A Maximum
Efficiency 95% peak
Tolerance Vout ±1.0%
Transient Response ±5% at load variation 10-90% or 90-10%
50ms recovery
Load Sharing MPPT unconstrained, otherwise <5% of nominal current
Ripple <200mV p-p (BW 20 MHz)
Psophometric <2mV, according to CCITT norms
STANDARDS
Safety CAN/CSA C22.2 No 62368-1:2014; UL 62368-1:2014; EN 62368-1:2014/A11:2017
EMC EN61000-6-2, EN61000-6-3, FCC Part 15 Class B, EN61000-6-2, EN 61000-6-4
Environmental Storage: ETSI EN300 019-2-1
Transport: ETSI EN300 019-2-2
Operation: ETSI EN300 019-2-3
Damp Heat: IEC60068-2-78
MIL-STD-810D section 507.2
Earthquake: GR 63 Core Zone 4
MECHANICAL
Dimensions, inches (mm) 4.2 W x 14.0 D x 1.6 H (107 W x 355 D x 41 H)
Weight 4.6lbs. (2.1kg)
Cooling Fan-cooled, speed controlled
Insulation 4.25kVDC primary-secondary
2.12kVDC primary-ground
0.1kVDC secondary-ground
Enclosure IP20
Mounting 19in/23in x 1U subrack
up to 4/5 modules
GENERAL
Protection Short circuit proof, Automatic current limiting, Selective shutdown of modules at excessive output voltage, Thermal protection
Alarms High output voltage/ shutdown, Low voltage / module failure
LED Indicators Bicolor: Green ON: Power ON | Red ON: Module failure / high output voltage/ shutdown
Yellow: ON: Current limit, Thermal protection | Blinking: Communication failure
Audible Noise <60dBA
Operating Temperature -40°C to +65°C up to 2000m
Reduced spec -40°C to -20°C
Derated output power from 45°C linear derating to 65°C
For 3000m altitude derated by 5°C
Storage Temperature -60°C to +85°C
MTBF @ 25°C (without fan) Telcordia SR-332, Issue 3: 450kh @ 25°C, with fan
MIL-HDBK-217F-2: 273kh @ 25°C, with fan