Lithium SAFEFlex is a comprehensive Material Handling battery solution designed to meet the cost, performance, efficiency and durability requirements of the rugged warehouse environment. It includes application-specific cell chemistry and intelligent battery management electronics. FBP-1000 series 36V Lithium SafeFlex Material Handling battery systems are high cycle life maintenance free solutions for industrial vehicles with fully customizable features to fulfill the most demanding requirements. The drop in replacement batteries make upgrading from Lead Acid to Lithium simple. The batteries are sized to fit the standard motive power lead acid battery, along with meeting the truck battery weight requirements.
Lithium SAFEFlex is a comprehensive Material Handling battery solution designed to meet the cost, performance, efficiency and durability requirements of the rugged warehouse environment. It includes application-specific cell chemistry and intelligent battery management electronics. FBP-1000 series 24V Lithium SafeFlex Material Handling battery systems are high cycle life maintenance free solutions for industrial vehicles with fully customizable features to fulfill the most demanding requirements. The drop in replacement batteries make upgrading from Lead Acid to Lithium simple. The batteries are sized to fit the standard motive power lead acid battery, along with meeting the truck battery weight requirements.
Simplified operation, minimum maintenance and long, economical service are a few of the advantages you get with an ARR-M Series 3 phase utility charger.
Electrical and mechanical design features make it ideal for a wide variety of utility, industrial and other standby power supply applications.
The SCIMITAR 5000 Series are 5000 watt inverters which are 19” rack-mountable and only 3RU high. Different models operate from a 24 or 48 VDC source and produce a sine-wave 115 or 230 VAC output.
The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulse-width modulation technique which achieves up to 92% efficiency.
A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off.
In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems.
Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.
The SCIMITAR 3000 Series are 3000 watt inverters which are 19” rack-mountable and only 2RU high. Different models operate from a 12, 24 or 48 VDC source and produce a sine-wave 115 or 230 VAC output.
The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulse-width modulation technique which achieves up to 92% efficiency.
A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off.
In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems.
Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.
The SCIMITAR Series are 1kVA and 2kVA inverters which are 19” rack-mountable and only 1RU high. They operate from a 12V, 24V or 48VDC source and produce a 115 or 230VAC output.
The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulsewidth modulation technique which achieves up to 92% efficiency.
A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off.
In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems.
Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.
BRAVO ECI 48/230 is a compact and scalable modular inverter providing a pure sine wave AC supply. In conjunction with a DC Power system, it provides an excellent AC backup solution. It uses the latest inverter technology, providing superior energy efficiency in a compact size.
The ECI technology eliminates all single points of failure with full scalability; up to 32 modules in parallel and high efficiency of up to 96% in AC to AC conversion and above 93.5% in DC/AC conversion; hence reducing operating costs. Systems can be scaled up to 36kVA.
BRAVO ECI 48/230 systems can be configure for operation in split phase and three phase applications using a combination of shelves.
Bravo TSI 48/120 is a compact modular inverter that converts a 48VDC power source into 120VAC and provides a pure sine wave. By using several modules, we can offer solutions for two-phase (2 x 120Vac + N) or three-phase (3 x208VAC + N) infrastructures.
The extra AC input ensures a high overall efficiency (up to 95%) which results in a reduction of energy loss and heat dissipation.
This module has a modularity from 2.5kVA to up to 30kVA in order to be able to evolve with your needs. The hot swap feature makes maintenance easier and reduces the risk of errors.
The low ripple voltage avoids any disturbances on DC loads and batteries.
The 3783 Series 4U TPS Fuse Panel provides a compact power distribution solution with high-capacity, current interrupting fuses.
The 3783 Series TPS Fuse Panel has an input voltage requirement of +24V or -48V, accepts up to 20 fuses and has a maximum capacity of 600 amps. Each fuse holder requires one (1) main and one (1) alarm fuse (a 0.5 amp GMT fuse is recommended as the alarm fuse). A fuse alarm signal is available for extension to a separate alarm system.
The TPS Fuse Panel can be supplied with our without a 600A / 50mV shunt.
3906 Series provides a compact battery disconnect solution with high-capacity, current-interrupting breakers.
The 3906 Battery Breaker Panel can be configured for +24V or -48V operation and has a maximum capacity of 500 amps. Up to 13 breakers rated from 5A to 100A can be installed, subject to the overall capacity not being exceeded.
The 3906 Battery Breaker Panel incorporates a 500A return busbar.
The 3768 19″ DC Breaker Panel provides a compact power distribution solution with high-capacity current-interrupting breakers in a 3RU high open-frame format.
The 3768 DC Breaker Panel has an input voltage options of +24V or -48V and has a maximum capacity of 500 amps.
Up to 18 breakers rated from 5A to 100A can be installed, subject to the overall capacity not being exceeded.
The 3768 DC Breaker Panel can be supplied with or without a 600A / 50mV shunt.
The 3765 23″ 3U DC Breaker Panel provides a compact power distribution solution with high-capacity current-interrupting breakers in a 3RU high open-frame format.
The 3765 3U DC Breaker Panel has an input voltage options of +24V or -48V and has a maximum capacity of 600 amps.
Up to 24 breakers rated from 5A to 125A can be installed, subject to the overall capacity not being exceeded.
The 3765 3U DC Breaker Panel can be supplied with or without a 600A / 50mV shunt.
Upcoming Events
There are no upcoming events.
X
Customer Ratings and Reviews
Green Cubes is a great company, great engineers, great product. That’s been kind of my number one go to [lithium] battery.
President, Industrial Power Company
The thing I like about Green Cubes is that they have other lines of business outside of material handling batteries, they have been in the lithium world for a long time. I can trust they will likely stay in business
VP, Industrial Battery Company
Green Cubes [differentiates] on its capability to custom design for things like the hardware, the firmware, and inverters. They also have economies of scale because they make battery systems for things like forklifts.
VP, Powered Cart OEM
I am doing some work with them right now. We’re learning their products, and looking at demos. They have good people. They seem like they know the technology well – they say they’re a technology company. I like that they’ve been in the lithium business a long time. I can trust they will likely stay in business.
Sales Manager, Industrial Battery Company
Green Cubes Technology would be my go-to for lithium applications.
Branch Manager, OEM
I’ve told my friends at Green Cubes, I don’t plan on going anywhere. I believe in loyalty.
