Sageon Micro

Sageon Micro

Sageon

Get a Quote

Product Information

The SAGEON Micro 200 amp DC power system delivers the unmatched capability of a full size SAGEON Power System in a compact and cost effective solution.

Designed to deliver up to 200 amps of power for 24 volt or 48 volt systems, the Micro Power Module provides the flexibility to put power where it is needed. The Micro Power Module also offers the flexibility to configure the best solution for your needs with options including integrated battery disconnects and load distribution; all in space saving configurations from two through seven rack units.

The SAGEON Micro 200 amp DC power system consists of a power frame that includes the SAGEON Controller, mechanical mounting for up to seven SAGEON Micro Rectifiers, all inter-system cabling, and optional items including AC input breakers, battery disconnects, DC distribution breakers and fuses, and remote communications – all factory installed and tested. Installation cost and time are minimized because there is only one component to install. To complete your system simply connect your AC and DC cables, plug-in the SAGEON Micro Rectifiers, and you are ready to go.

In addition to the basic control functions, the SAGEON Micro 200 amp DC power system supports all of the advanced functionality available in a SAGEON Power System including; remote monitor and control, battery testing, individual cell monitoring, programmable battery recharge current, and site monitoring.

Three Year warranty
Features and Options
  • High Power Density
  • 200A Capacity
  • 24VDC or 48VDC
  • 2400W Hot-Swap Rectifiers
  • Battery Testing
  • Battery Monitoring
  • Remote Monitoring & Control
  • Programmable Battery Recharge
  • Field Replaceable Controller
  • LCD Display/Touchpad
SPECIFICATIONS
INPUT
Voltage Range AC 85-300VAC (L-N. 1ph, or 3ph-Y, 3ph-delta [option].
Fully protected up to 440VAC (L-N)
Frequency 47-63Hz
Inrush Current <9A RMS per rectifier
THD Line Harmonics meet EN61000-3-2
Power Factor >0.98 for >50% output power
OUTPUT
Voltage Range -48VDC systems, adjustable range 42.0V to 59.5V
+24VDC systems, adjustable range 21.0V to 30.0V
Current Limit Adjustable from 20 % to 120 % of rated output current
Power Limit Varies by rectifier model. See the rectifier brochures for more information.
Efficiency >90% at 100% output power for 48VDC systems
>88% at 100% output power for 24V systems
Regulation ±1% or better over line, load and temperature
Noise .1% pk-pk max.
Line Regulation <1mV RMS Psophometrically weighted
<32dBrnC Voiceband
<10mV RMS and <100mV peak-to-peak (10kHz-100MHz)
PROTECTION
Short Circuit Can sustain short circuit at output terminals indefinitely
Reverse Battery Polarity Internal fuse at output of RECTIFIER, integral battery circuit breakers and detection/disconnection circuitry
High Voltage Shutdown Rectifier shuts down if output exceeds programmed overvoltage limit
Electrostatic Discharge (ESD) IEC 61000-4-2 (Level 4: Air 15kV, Contact 8kV)
AC Surge IEC 61000-4-4 (EFT), Level 4
IEC 61000-4-5 (Impulse), Level X: 6kV/3kA
IEC 61000-4-12 (Ringwave), Level X: 6kV/500A
RF Immunity IEC 61000-4-3 (Radiated), Level 4
IEC 61000-4-6 (Conducted), Level 3
RF Emissions CISPR 22 Class B, (Conducted & Radiated)
ENVIRONMENTAL
Operating Temp. Range -40°C to +55°C (Full Load)
Derating Operation 50% power at +70°C
Storage Temp. Range -40°C to +70°C
Humidity 0 to 100% relative humidity, condensing
Acoustic Noise <60dB (A weighting)
PHYSICAL SPECIFICATIONS
Dimensions, inches (mm) 3.4-13.6 (88-352) H x 19.0 (483) W x 14.0 (355) D – see configurations table
Weight 14-64lb (6-29kg) – see configurations table
COMPLIANCE
EMC ETSI EN 300 386 V1.3.2 (2002-12)
Safety IEC 60950, UL/CSA 60950
Environmental ETSI EN 300 019

 

STANDARD SYSTEM CONFIGURATIONS
Output
Current		 Example Height Weight
40A 1RU 14lb | 6kg
80A 2RU 20lb | 9kg
120A 3RU 29lb | 13kg
160A 4RU 37lb | 17kg
200A 5RU 46lb | 21kg
200A 6RU 55lb | 25kg
200A 7RU 64lb | 29kg