Guardian RFK 2
The Guardian RFK2 Bulk Power kit is a 5RU high 23” rack-mounted, 400A DC power system with alarm panel providing a bulk output of -48VDC. The kit includes a 3RU panel containg two rectifier/controller power shelves incorporating up to 7 Guardian family high efficiency hot-swap rectifiers modules along with an ACX Advanced system controller.
The Guardian rectifiers are internally fan cooled with speed control which is a function of load and temperature, keeping acoustic noise to a minimum.
A 2RU alarm panel provides the alarm functions described below and the kit is completed with rear support shelf, LVD contactor by-pass bus bar and mounting hardware.
The ACX Advanced controller monitors system parameters, controls rectifier output, and provides alarms for system failures. The controller is hot-pluggable for easy field replacement in case of failure. There are 2 LED alarm indicators which indicate failures, (RED) Alarm and (YELLOW) Message. A third green LED indicates the controller is working properly. As standard ten form-C relay outputs provide the alarms for remote use. Two digital inputs and outputs are also provided as well as an SD card with sufficient capacity for more than 20 years data logging.
The system can be programmed by means of a remote PC web page display. Communication is by Ethernet LAN with SNMPv3 including alarm trapping. It also has provision for temperature compensated charging of an external battery using a supplied TC probe. An LCD Display/Touchpad is included for local metering, status, and setup.
The Guardian AGM Retrofit Kit is compatible with the free PowCom™ software which offers local and remote management through an advanced Windows GUI.
Three Year warranty
Features and Options
- Replaces Power Section for Legacy Systems
- >96% Efficiency Rectifiers
- 400A Capacity
- Remote Monitoring & Control
- Field Replaceable Controller
- Ethernet Comm. with SNMPv3
- 3 LED Alarm/Status Indicators
- Form-C Relay Alarms
- LCD Display/Touchpad
- Easy Installation
|System Voltage||-48VDC nominal | -53.5 float (factory default setting, user adjustable)|
|Maximum Capacity||Load – 400A|
|No. Rectifier Slots||7|
|Bus Bars & Lugs||Kit includes hardware to connect to existing installation|
|Voltage (nominal)||1-phase 230/240VAC (L-N-PE)
2-phase 240VAC (L1-L2-PE)
3-phase (3-wire Wye) – 190/200/216/208/220/240VAC (L1-L2-PE / L2-L3-PE / L3-L1-PE)
3-phase (4-wire Delta) – 200/210/220/230/240VAC (L1-N-PE / L2-N-PE / L3-N-PE)
|Maximum Input Current||17.5A per rectifier|
|Rectifier Power Factor||>0.98 (typical)|
|Terminals Blocks||L/N or L1/L2 per rectifier position – accepting wire gauge 24-10AWG|
|MONITORING & CONTROL (ACX Advanced Controller)|
|Alarm Relays||10 standard|
|Local Interface||4 x 20 LCD, 4-key menu, USB / RS232, microSD card slot (4GB max,) for data logging|
|Remote Interface||Ethernet / Modem using PowCom software package
Ethernet port allows monitoring and control over a TCP/IP network.
Web browser support + SNMPv3
|LED Indications||Green – System ON; Yellow – Message(s); Red LED – Alarm(s)|
|External Digital I/O||2 x Inputs, 2 x Outputs (TTL Level)|
|EMC||EN 300 386 ; EN61000-6-3 (Emission) ; EN61000-6-2 (Immunity)|
|Safety||CAN/CSA C22.2 No 62368-1:2014; UL 62368-1:2014; EN 62368-1:2014/A11:2017|
|Operating Temperature||-40ºC to +55ºC|
|Storage Temperature||-40ºC to +85ºC|
|INTELLIGENT BATTERY MANAGEMENT
(PROVIDED VIA ACX ADVANCED CONTROLLER)
|Battery Disconnection||Provides voltage controlled disconnection of batteries.|
|Boost Charging||Manual time controlled or automatic boost charging with adjustable time and voltage levels.|
|Battery Tests||Automatic or manual testing of batteries up to six times per year with a 10 test memory. Variables include test duration and end voltage.
Battery discontinuance test to ensure battery connection.
|Enhanced Battery Monitoring||Monthly logging of essential battery parameters including temperature, temperature hours, current, charging voltage and symmetry voltage, Data logged for 5 years.|
|Site Logs||System tools developed to assist site management. Daily peak load and statistic logs available.|
|Symmetry Measurement||Optional tool that measures batteries for early detection of thermal runaway.|
|Temperature Compensation Charging||Allows continuous adjustment of output voltage according to battery temperature.
Features include adjustable compensation factor and separate thresholds for high temperature alarms.