Archives

IoT Solutions

Features

Better Fleet Utilization

  • Indicates when opportunity charging is being utilized by your ground support equipment operators
  • Anticipate when battery service will be needed
  • Receive notifications when batteries need charging
  • Understand usage patterns of your mobile workstations for better insight into fleet utilization
  • Reports real-time and historical locations to the nearest WiFi access point

Energy Savings

  • Select the optimal time to charge your batteries (i.e. lunch, coffee break, off-peak hours)
  • Monitor state of charge while charging battery to determine when completed and send SMS to ground support equipment operator to notify of charge status

Versatile Application

  • Application operates on any WiFi enabled device
  • Personalize your fleet by customizing each piece of equipment with a name, color, description and category
  • Add multiple users to let the team track fleet performance
  • Customizable dashboard presents data that is most important to you
  • Fleet-wide view tracks every piece of equipment at every airport

Benefits

  • Increases up time by optimizing charging regimes, reducing charge time and indicating when opportunity charging can be utilized
  • Increases fleet utilization by notifying operators when charging is complete
  • Lowers electrical consumption and energy costs

Scimitar 5000

The SIMITAR 5000 Series are 5000 watt inverters which are 19” rack-mountable and only 3RU high. Different models operate from a 24 or 48 VDC source and produce a sine-wave 115 or 230 VAC output.

The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulse-width modulation technique which achieves up to 92% efficiency.

A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off.
In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems.

Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.

Scimitar 3000

The SIMITAR 3000 Series are 3000 watt inverters which are 19” rack-mountable and only 2RU high. Different models operate from a 12, 24 or 48 VDC source and produce a sine-wave 115 or 230 VAC output.

The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulse-width modulation technique which achieves up to 92% efficiency.

A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off.
In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems.

Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.

Scimitar 1000 & 2000

The SCIMITAR Series are 1kVA and 2kVA inverters which are 19” rack-mountable and only 1RU high. They operate from a 12V, 24V or 48VDC source and produce a 115 or 230VAC output.
The tightly regulated low distortion 50 or 60Hz sine wave is produced by DSP controlled power circuits using an advanced high frequency, pulsewidth modulation technique which achieves up to 92% efficiency.

A built-in Static Transfer Switch allows connection of a utility or other AC power source which can be switched to the load automatically in the event that the inverter switches off.

In normal operation these inverters isolate the load from wide voltage swings , transients and noise usually present in the AC utility and which can cause equipment reliability problems.

Output voltage and frequency are programmable from the front panel, as well as Baud Rate for the RS232 communications interface which can be used for remote monitoring.

Bravo ECI 48/230 Inverter

BRAVO ECI 48/230 is a compact and scalable modular inverter providing a pure sine wave AC supply. In conjunction with a DC Power system, it provides an excellent AC backup solution. It uses the latest inverter technology, providing superior energy efficiency in a compact size.

The ECI technology eliminates all single points of failure with full scalability; up to 32 modules in parallel and high efficiency of up to 96% in AC to AC conversion and above 93.5% in DC/AC conversion; hence reducing operating costs. Systems can be scaled up to 36kVA.

BRAVO ECI 48/230 systems can be configure for operation in split phase and three phase applications using a combination of shelves.

Bravo TSI 48/120 Inverter

Bravo TSI 48/120 is a compact modular inverter that converts a 48VDC power source into 120VAC and provides a pure sine wave. By using several modules, we can offer solutions for two-phase (2 x 120Vac + N) or three-phase (3 x208VAC + N) infrastructures.

The extra AC input ensures a high overall efficiency (up to 95%) which results in a reduction of energy loss and heat dissipation.

This module has a modularity from 2.5kVA to up to 30kVA in order to be able to evolve with your needs. The hot swap feature makes maintenance easier and reduces the risk of errors.

The low ripple voltage avoids any disturbances on DC loads and batteries.

4U 23in DC Fuse Panel

The 3783 Series 4U TPS Fuse Panel provides a compact power distribution solution with high-capacity, current interrupting fuses.

The 3783 Series TPS Fuse Panel has an input voltage requirement of +24V or -48V, accepts up to 20 fuses and has a maximum capacity of 600 amps. Each fuse holder requires one (1) main and one (1) alarm fuse (a 0.5 amp GMT fuse is recommended as the alarm fuse). A fuse alarm signal is available for extension to a separate alarm system.

The TPS Fuse Panel can be supplied with our without a 600A / 50mV shunt.

3U 23in Battery Breaker Panel

3906 Series provides a compact battery disconnect solution with high-capacity, current-interrupting breakers.

The 3906 Battery Breaker Panel can be configured for +24V or -48V operation and has a maximum capacity of 500 amps. Up to 13 breakers rated from 5A to 100A can be installed, subject to the overall capacity not being exceeded.

The 3906 Battery Breaker Panel incorporates a 500A return busbar.

3U 19in DC Breaker Panel

The 3768 19″ DC Breaker Panel provides a compact power distribution solution with high-capacity current-interrupting breakers in a 3RU high open-frame format.

The 3768 DC Breaker Panel has an input voltage options of +24V or -48V and has a maximum capacity of 500 amps.

Up to 18 breakers rated from 5A to 100A can be installed, subject to the overall capacity not being exceeded.

The 3768 DC Breaker Panel can be supplied with or without a 600A / 50mV shunt.

3U 23in DC Breaker Panel

The 3765 23″ 3U DC Breaker Panel provides a compact power distribution solution with high-capacity current-interrupting breakers in a 3RU high open-frame format.

The 3765 3U DC Breaker Panel has an input voltage options of +24V or -48V and has a maximum capacity of 600 amps.

Up to 24 breakers rated from 5A to 125A can be installed, subject to the overall capacity not being exceeded.

The 3765 3U DC Breaker Panel can be supplied with or without a 600A / 50mV shunt.

2U DC Breaker Panel

DPP2U Series 2u dc distribution panels provide distribution and overload protection for 1 to 20 circuits with circuit breakers that can be field installed/exchanged using a supplied puller tool.

UNIPOWER’s DPP2U Series circuit breaker panels provide distribution and overload protection for 1 to 20 circuits with circuit breakers that can be field installed/exchanged using a supplied puller tool. The panels are only two mounting positions (3.5 inches) high.

The dual-bus model provides up to 20 breakers 900A (10A/10B) distribution and alarm capabilities. The A and B sections are fully isolated from each other and are polarity neutral. Breaker capacities range from 2.5 to 200 amperes. A single-bus 450A model is also available.

Breaker and power fail alarms are indicated by a dual color LED (green/red) and Form C relay contacts for each bus.

Rear accessed load cables connect via 2-hole anti-rotation posts. All connections are straight on for easy installation.

1U AC Breaker Panel

DPAC1U Series AC circuit breaker panels provide AC distribution and overload protection for two to eight circuits.

The maximum output current capacity from each A or B section is 50A, or a total of 100A from both. Individual circuit breaker capacities may be chosen f rom 5A to 30A. Any combination of breakers may be selected as long as the total current capacity of 50A for each section is not exceeded. In the standard dual model (with sections A and B) the two sections are connected in common (parallel). An optional model is available with the A and B sections isolated.

The panels are only one rack space (1.75 inches) high and come with brackets that permit mounting in either a 19- or 23-inch relay rack. They can be mounted from the front of the rack with offsets every quarter inch front to back to align with existing rack mounted equipment.