Telecom Battery 48v Telecom Batteries | Telecom Lithium Ion Battery Telecom Battery Monitoring

Telecom

Telecom Lithium Ion Battery

Applications

The world is becoming more connected than ever. As more devices rely on continuous connection to the cloud, uptime becomes critical. Power delivery to these networks must be stable and reliable. Green Cubes provides complete stationary power solutions to the most demanding Telecom and Data Center installations in a safe, reliable, and efficient solution.

Millions of nodes are being installed throughout the network with the deployment of 5G. The location of these nodes is critical to the performance of the network. Operators need their equipment to fit into smaller and more challenging locations. All this equipment requires clean, stable, reliable power. Traditional telecom backup power has used large inefficient lead acid batteries that need frequent maintenance and replacement every few years. Actual run time is difficult to predict, and telecom battery cells can fail with little to no warning. Diesel generators are costly, polluting and considered a last resort backup solution. Green Cubes’ lithium battery backup power solutions provide clean, stable and reliable power.

Green Cubes Battery Backup Units for Telecom and Data Center utilize proven, clean 48V Lithium Ion batteries, and intelligent Battery Management Systems. Green Cubes battery backup units can be used stand alone, or paired with Guardian and Aspiro DC power systems for these demanding applications. These systems are easily customized into modular energy storage racks for every customer and application.

System Components

Battery Backup Unit

The Green Cubes Guardian Battery Unit (GBU) is a 48V 19” rack-mountable Lithium ion Battery Backup Unit designed to be used with any power system. The GBU Series is designed for data center and telecom applications for both new installations, or as a replacement to lead acid batteries.

The patented Energy Balance Technology (EBT) provides internal balancing among the BBU modular energy solutions connected in parallel. The EBT ensures consistent voltage and current delivery from the entire system of connected modules, which maximizes run-time and power delivery. This technology also solves many of the challenges system designers encounter when implementing a Lithium Ion Battery backup solution.

Remote management via ModBus to any site controller or Ethernet with PowCom™ software from Green Cubes (formerly branded as UNIPOWER) provides immediate access to performance and alarm information. Available in both Lithium Iron Phosphate (LiFePO4) and Lithium Ion (NMC). Lithium Iron Phosphate chemistry provides superior power delivery, as well as the longest cycle and calendar life. Lithium Ion (NMC) offers market leading energy density both volumetrically and gravimetrically. Each application is unique and using the correct battery chemistry is paramount to operational stability, and performance.

DC Power Systems

Green Cubes telecom batteries work seamlessly with Aspiro and Guardian DC power systems. These systems are available in cabinetized, hybrid, or rack-mountable format with capacities ranging from 45A to 5500A.

Aspiro DC power systems are 1RU and 2RU rack-mount from 45A to 90A at 48V. Guardian products are 2RU, 3RU, 5RU, 6RU, and 10RU rack-mount systems, as well as floor standing cabinet configurations from 200A to 5500A at 48V.

Rectifiers & Converters

Modular power rectifiers and power converters include the Aspiro and Guardian families of products:

  • Aspiro rectifiers provide a nominal 48V output rated at 1200W with efficiency up to 95%.
  • The Guardian family of rectifiers provide a nominal 48V output at 3000W at an efficiency up to 96%.
  • The Guardian PV converter is a 2.9kW 48VDC 60 amp Solar PV Converter. Maximum energy harvest from the photovoltaic (PV) array is accomplished through a >99% Maximum Power Point Tracking (MPPT) algorithm. These converters can be combined together with the Guardian AC to DC rectifiers in the same modular energy system to create true hybrid configurations.

Intelligent Management Module

The GCC (Green Cubes Controller) is a pluggable microprocessor based intelligent system management module that provides monitoring and control for a broad range of DC Power Systems and Green Cubes Lithium Battery Backup Units. The GCC monitors all system parameters including: DC voltage, rectifier current, rectifier temperature, system capacity, battery parameters, and circuit breaker status. This smart module can be remotely accessed via the internet to allow for control and monitoring of critical power systems from anywhere.

Next Event

25th Annual GHI Conference
3 Dec 2024

Visit us at the 25th Annual GHI Conference, December 3-5, 2024, 2024 in CCIB, Barcelona, Spain, at B...

Read More

Products

Sageon Micro

Sageon Micro
Features and Options
  • High Power Density
  • 200A Capacity
  • 24VDC or 48VDC
  • 2400W Hot-Swap Rectifiers
  • Battery Testing
  • Battery Monitoring
  • Remote Monitoring & Control
  • Programmable Battery Recharge
  • Field Replaceable Controller
  • LCD Display/Touchpad

Sageon II

Sageon II
Features and Options
  • High Power Density
  • 400A or 600A Capacity
  • 24VDC or 48VDC
  • 2400W Hot-Swap Rectifiers
  • Battery Testing
  • Battery Monitoring
  • Remote Monitoring & Control
  • Programmable Battery Recharge
  • Field Replaceable Controller
  • LCD Display/Touchpad

Sageon III

Features and Options
  • TRUE FULL Front Access
  • 600A or 1200A Capacity
  • 60-Way load Distribution
  • 2400W Hot-Swap Rectifiers
  • Battery Testing
  • Battery Monitoring
  • Remote Monitoring & Control
  • Programmable Battery Recharge
  • Field Replaceable Controller
  • LCD Display/Touchpad

sageon 24V Rectifier

Features and Options
  • >88% typical efficiency
  • 12A to 50A models
  • Wide input voltage range
  • Thermal protection
  • Hot-swappable
  • International standards compliance

sageon 48V Rectifier

Features and Options
  • >90% typical efficiency
  • 6A to 50A models
  • Wide input voltage range
  • Thermal protection
  • Hot-swappable
  • International standards compliance

Sageon Shield

Features and Options
  • Monitors 48V battery strings
  • Individual cell monitoring
  • Network Communications
  • Works with Sageview PC Software

1U Pluggable DC Breaker Panel

Features and Options
  • 150A bus bar inputs
  • Single or Dual Feed
  • NO tools required to change breakers
  • Tapered entry for easy insertion
  • NO or NC alarm contacts
  • Alarm LEDs
  • Power Fail form-C alarm
  • 19″ & 23″ universal mounting brackets
  • Rear panel safety cover standard

1U Fixed DC Breaker Panel

1U Fixed DC Breaker Panel
Features and Options
  • One Mounting Position High: 1.75″
  • 19- or 23-Inch Rack Mounting
  • Magnetic Circuit Breakers
  • Single Bus with 1 to 12 Breakers
  • Dual Bus (A/B) with 1 to 6 Breakers each side
  • Voltage: 12, 24 or 48VDC
  • POLARITY NEUTRAL
  • A & B are Isolated Loads
  • A & B Can Be Separately Configured
  • 1A to 50A per Breaker
  • Bus Capacity: 150A per Bus
  • Green/Red LED Breaker Alarm
  • Two Form C Relay Contacts per Bus (A/B)
  • Rack Offset Every ¼” from Front to Back
  • Fail Safe Option
  • Circuit Breaker Panels

1U AC Breaker Panel

1U AC Breaker Panel
Features and Options
  • One Rack Space High: 1.75”
  • 19- or 23-Inch Rack Mounting
  • Terminal BlockOutputs
  • Voltage: 120VAC or 230VAC Nominal
  • Up to 8 AC Circuits with Breakers
  • Single (A) or Dual (A & B) Sections
  • 50A AC Per Section (100A Total)
  • Common or Isolated A & B Sections
  • A & B Can Be Separately Configured
  • AC Breaker Capacities: 5A to 30A
  • Up to 4 Inputs
  • Rack Offset Every ¼” from Front to Back

2U DC Breaker Panel

2U DC Breaker Panel
Features and Options
  • 48/24V Dual Voltage
  • POLARITY NEUTRAL
  • 450A bus bar inputs (900A total)
  • Dual Feed (optional Single Feed)
  • “Mid-Trip” circuit breaker function
  • Circuit Breaker ‘puller’ included
  • Tapered entry for easy insertion
  • NO or NC alarm contacts
  • Alarm LEDs
  • Power Fail form-C alarm
  • 19″ & 23″ universal mounting brackets
  • Rear panel safety cover standard

3U 23in DC Breaker Panel

Features and Options
  • 3RU High: 5.22”
  • 23-Inch Rack Mounting
  • Current Capacity: 600A
  • Operating Voltage: +24 or -48VDC
  • 24 Breakers – 5A to 125A
  • LED Alarm Indicator
  • Form C Relay Contacts

3U 19in DC Breaker Panel

Features and Options
  • 3RU High: 5.22”
  • 19-Inch Rack Mounting
  • Current Capacity: 500A
  • Operating Voltage: +24 or -48VDC
  • 18 Breakers – 5A to 100A
  • LED Alarm Indicator
  • Form C Relay Contacts

3U 23in Battery Breaker Panel

3U 23in Battery Breaker Panel
Features and Options
  • 3RU High: 5.22”
  • 23-Inch Rack Mounting
  • Current Capacity: 500A
  • Operating Voltage:+24 or -48VDC
  • 13 Breakers – 5A to 100A
  • Integral Return Bar
  • LED Alarm Indicator
  • Form C Relay Contacts

4U 23in DC Fuse Panel

Features and Options
  • 4RU High: 6.97”
  • 23-Inch Rack Mounting
  • Current Capacity: 600A
  • Operating Voltage: +24 or -48VDC
  • 20 x TPS Fuses – 3A to 70A
  • LED Alarm Indicator
  • Form C Relay Contacts
  • Spare Fuses May Be Stored In Each Fuse Block Handle

Bravo TSI 48/120 Inverter

Bravo TSI 48/120 Inverter
Features and Options
  • Extra AC input for increased efficiency
  • Compact design
  • Up to 30kVA
  • No disturbances on DC loads & batteries

Bravo ECI 48/230 Inverter

Features and Options
  • Extra AC input for increased efficiency
  • Compact design
  • Up to 36kVA
  • 1-phase, split phase or 3-phase
  • No disturbances on DC loads & batteries

Scimitar 1000 & 2000

Features and Options
  • 19-Inch x 1UR Rack Mounting
  • 1000 or 2000 VA Output Capacity
  • 115VAC or 230VAC Output
  • 50 or 60Hz Low Distortion Sine Wave
  • 12, 24 or 48VDC Input
  • -20 to +60C Operating Temperature Range
  • Static Transfer Switch Built-in
  • Programmable Output Voltage and Frequency (Front panel DIP switch)
  • Powers Reactive Loads
  • LED Status Display
  • Relay Alarm Output

Scimitar 3000

Features and Options
  • 19-Inch x 2RU Rack Mounting
  • 3000W Output Capacity
  • 115VAC or 230VAC Output
  • 50 or 60Hz Low Distortion Sine Wave
  • 12, 24 or 48 VDC Input
  • -20 to +50°C Operating Temperature
  • Static Transfer Switch Built-in
  • Adjustable Output Voltage
  • Programmable Frequency (DIP switch)
  • Powers Reactive Loads
  • LED Status Display
  • Relay Alarm Output

Scimitar 5000

Features and Options
  • 19-Inch x 3RU Rack Mounting
  • 5000W Output Capacity
  • 115VAC or 230VAC Output
  • 50 or 60Hz Low Distortion Sine Wave
  • 24 or 48 VDC Input
  • -20 to +50°C Operating Temperature
  • Static Transfer Switch Built-in
  • Adjustable Output Voltage
  • Programmable Frequency (DIP switch)
  • Powers Reactive Loads
  • LED Status Display
  • Relay Alarm Output

Customer Ratings and Reviews

Green Cubes is a great company, great engineers, great product. That’s been kind of my number one go to [lithium] battery.

President, Industrial Power Company

The thing I like about Green Cubes is that they have other lines of business outside of material handling batteries, they have been in the lithium world for a long time. I can trust they will likely stay in business

VP, Industrial Battery Company

Green Cubes [differentiates] on its capability to custom design for things like the hardware, the firmware, and inverters. They also have economies of scale because they make battery systems for things like forklifts.

VP, Powered Cart OEM

I am doing some work with them right now. We’re learning their products, and looking at demos. They have good people. They seem like they know the technology well – they say they’re a technology company. I like that they’ve been in the lithium business a long time. I can trust they will likely stay in business.

Sales Manager, Industrial Battery Company

Green Cubes Technology would be my go-to for lithium applications.

Branch Manager, OEM

I’ve told my friends at Green Cubes, I don’t plan on going anywhere. I believe in loyalty.

President, Industrial Power Company